Rubber Chemicals - Antioxidants

S-Nox TMQ

S-Nox SP

S-Nox 6PPD

S-Nox TMQ
   
AANTIOXIDANTS / S-NOX
S-Nox TMQ S-Nox SPS-Cure F
Titanium dioxide- Rutile grade Titanium dioxide- Anatase gradeS-Cure MBT
   
Product Identification 2,2,4-trimethy-1,2-dihydroquinoline, polymerised
Supply Form S-Cure CBS    Brownish yellow lentil shaped pastiles
 
• Product Characteristics
Test Nominal Value Unit
Softening point 90 +/- 5.0 Deg C
Assay min. 95.0 %
Ash content max. 0.1 %
     
• Additional Information
Test Typical Value Unit
Density 1.09 gm/cc
     

• Particular Features
Storage Keep cool and in dry condition
Packaging 20 Kg. paper bags with inside liner and outer plastic liner
   

- Top -

S-Nox SP
 
Product Identification Mixture of styrenated phenols
Supply Form Yellow to brownish viscous liquid.
 
• Product Characteristics
Test Nominal Value Unit
Refrative index at 20 deg C 1.6020 +/- 0.0020 ----
Volatility 5 hr 100 deg C <5 %
viscosity at 25 deg C 3750 +/- 1250 mPa s
     

• Additional Information
Test Typical Value Unit
Density at 20 deg C 1.09 gm/cc
     
[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

- Top -

 S-Nox 6PPD
 
N-1, 3- DIMETHY BUTYL - N - PHENYL PARAPHENYLENEDIAMINE (6PPD)
MOLECULAR WEIGHT : 268
 
• Product Characteristics
Test Nominal Value
APPEARANCE DARK PURPLE PASTILES
SPECIFIC GRAVITY (AT 25 DEG C) 1.0`
MELTING POINT 450C
HEAT LOSS AT 1000 C FOR 2 HRS BY % MASS 0.5 MAX
ASSAT, % BY MASS 96 % MAX
ASH CONTENT, % 0.1 MAXIMUM

• Solubility
Solubility Ethyl Alcohol Acetone. Moderately soluble in hydrocarbon solvents in water.

• Classification
Discolouring & Staining type antidegradant.

• Discolouration & Staining
6PPD will discolour product. Contact staining is experienced on other surfaces contact with rubber products.

- Top -