Products / Antioxidants...
 
 
 S-Nox TMQ
AANTIOXIDANTS / S-NOX
S-Nox TMQ S-Nox SPS-Cure F
Titanium dioxide- Rutile grade Titanium dioxide- Anatase gradeS-Cure MBT
 
Product Identification   2,2,4-trimethy-1,2-dihydroquinoline, polymerised
Supply Form S-Cure CBS Brownish yellow lentil shaped pastiles
 • Product Characteristics
Test Nominal Value Unit

Softening point
Assay
Ash content

90 +/- 5.0
min. 95.0
max. 0.1

Deg C
%
%
 
 • Additional Information
Test
Typical Value
Unit
Density
1.09
gm/cc
 
 • Particular Features
  Storage Keep cool and in dry condition
  Packaging 20 Kg. paper bags with inside liner and outer plastic liner
 
 S-Nox SP
  Product Identification Mixture of styrenated phenols
  Supply Form Yellow to brownish viscous liquid.
 
 • Product Characteristics
Test
Nomial Value
Unit
Refrative index at 20 deg C
Volatility 5 hr 100 deg C
viscosity at 25 deg C
1.6020 +/- 0.0020
<5
3750 +/- 1250
----
%
mPa s
 
 • Additional Information
Test
Typical Value
Unit
Density at 20 deg C
1.09
gm/cc
Solubility: Soluble in acetone, ethyl a lcohol, petrol (gasoline),methylene chloride, insoluble in water.
 
 • Particular Features
  Storage Keep cool and indfinitely under suitable condition
  Packaging 25/50 Kg. Jerry cans
[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]
 
 S-Nox 6PPD

N-1, 3- DIMETHY BUTYL - N - PHENYL PARAPHENYLENEDIAMINE (6PPD)
MOLECULAR WEIGHT : 268
 
 • Product Characteristics
APPEARANCE
DARK PURPLE PASTILES
SPECIFIC GRAVITY (AT 25 DEG C)
1.0`
MELTING POINT
450C
HEAT LOSS AT 1000 C FOR 2 HRS BY % MASS
0.5 MAX
ASSAT, % BY MASS
96 % MAX
ASH CONTENT, %
0.1 MAXIMUM
 
 • Solubility
 Solubility Ethyl Alcohol Acetone. Moderately soluble in hydrocarbon solvents in water.
 
 • Classification
 Discolouring & Staining type antidegradant.
 
 • Discolouration & Staining
 6PPD will discolour product. Contact staining is experienced on other surfaces contact with rubber products.