Home

• About us
• Quality and R & D
• Media center
• Career
• Enquiry
• Contact us

Rubber Chemical Division

• Accelerator
• Antioxidants
• Reclaiming Agents
• Reinforcing Agents

Titanium Dioxide Division

• Anatase
• Rutil R708
• Rutil R709

Zinc oxide Division

• White Seal Grade
• Feed Grade
• Pharma Grade

Rubber Chemicals - Accelerator

S-Cure TMT	S-Cure CBS	S-Cure ZMBT	S-Cure F
S-Cure ZDC	S-Cure MBT		S-Cure MBTS

S-Cure TMT

Product Identification Tetre methyl thiuram disulphide Supply Form White to greyish

• Product Characteristics Test Nominal Value Unit Initial melting point min. 146.0 Deg C Final melting point max. 160.0 Deg C Assay min. 96.0 % Ash content max. 0.3 % Volatile matter max. 0.3 % Sieve residue (0.063 mm) max 0.3 %

• Additional Information Test Typical Value Unit Density 1.4 gm/cc

Soluble: Soluble in acetone, partially souble in naptha and primary alcohol and insoluble in water [These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

- Top -

S-Cure CBS

Product Identification   Benzothiazyl-2-cyclothexyl sulphenamide Supply Form S-Cure CBS Greyish white powder   S-Cure CBS/P Greyish white powder

• Product Characteristics Test Nominal Value Unit Initial melting point min. 98.0 Deg C Final melting point max. 107.0 Deg C Assay min. 95.0 % Ash content max. 0.3   Volatile matter max. 0.3 % Insoluble in methanol max 0.5   Free amine max. 0.4

• Additional Information Test Typical Value Unit Density 1.3 gm/cc       • Particular Features Storage Keep cool and in dry condition Packaging 20 Kg. paper bags with inside liner and outer plastic liner

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

- Top -

S-Cure ZMBT

Product Identification Zink Salt of 2-mercaptobenzothiazole Supply Form Yellowish white powder.

• Product Characteristics Test Nominal Value Unit Zinc content 17.0 +/- 1.0 % Volatile matter max. 0.3 % Sieve residue (0.063 mm) max. 0.5 % Free MBT 13.5 +/- 2.5 %

• Additional Information Test Typical Value Unit Density 1.7 gm/cc

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

- Top -

S-Cure F

Product Identification Combination of dibenzothiazyl disulphide with basic accelerators. Supply Form Creamish yellow coloured powder

• Product Characteristics Test Nominal Value Unit Assay DPG content 13.0 +/- 1.0 HMT content 15.0 +/- 1.0 % Free MBT ---- % Ash content max 1.0 % Volatile matter max. 0.3 %

• Additional Information Test Typical Value Unit Density 1.4 gm/cc       • Particular Features Storage Keep cool and in dry condition Packaging 20 Kg. paper bags with inside liner and outer plastic liner

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

- Top -

S-Cure ZDC

Product Identification Zinc diethyl dithiocarbamate Supply Form White to yellowish powder

• Product Characteristics Test Nominal Value Unit Initial melting point min. 175.0 Deg C Final melting point max. 185.0 Deg C Assay min. 97.0 % Ash content max. 0.3 % Volatile matter max. 0.3 %

• Additional Information Test Typical Value Unit Density 1.49 gm/cc       • Particular Features Storage Keep cool and in dry condition Packaging 20 Kg. paper bags with inside liner and outer plastic liner

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

- Top -

S-Cure MBT

Product Identification 2- mercaptobenzothiazole (MBT) Supply Form Yellowish - white power

• Product Characteristics Test Nominal Value Unit Initial melting point min. 174.0 Deg C Final melting point max. 184.0 Deg C Assay min. 94.0 % Ash content max. 0.6 % Volatile matter max. 0.3 % Sieve residue ( 0.063 mm) max 0.1 %

• Additional Information Test Typical Value Unit Density 1.5 gm/cc       • Particular Features Storage Soluble in acetone and dilute alkali, partially soluble in alcohol and insoluble in water.

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

- Top -

S-Cure MBTS

Product Identification Dibenzothiazy disulphide Supply Form Creame coloured power

• Product Characteristics Test Nominal Value Unit Initial melting point min.168.0 Deg C Final melting point max. 183.0 Deg C Assay min. 95.0 % Free MBT max. 1.0 % Ash content max. 0.6 % Volatile matter max 0.3 % Sieve residue ( 0.063 mm) max. 0.1 %

• Additional Information Test Typical Value Unit Density 1.5 gm/cc       • Particular Features Storage Keep cool and in dry condition Packaging 20 Kg. paper bags with inside liner and outer plastic liner

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

- Top -